|
Description:
17g Digital Micro Servo
This servo is designed to be used in R/C glider applications. By using carbon nylon gears and optimizing the curvature of the gears, the gears are able to withstand large amounts of force.
The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. If you hook the servo up incorrectly nothing bad will happen - just flip the S connector around and the servo will work correctly.
1. Carbon+15% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. Extra Strong torque with low signal affect and success get CE certification.
4. Rubber seals for waterproof case
5. Designed to be used in R/C glider applications.
6. Futaba compatible 25-tooth aluminum 6061 output splines
7. Digital motor drive with ultra-square PWM signal
8. Automatic determination of servo center pulse width
9. Metal gears of aluminum 6061 material combined with light and strong C95 material
10. Fail-Safe function
11. Digital control IC - SOP package with 12bit data transfer
12. MOS-FET motor driver chips that can handle 7A peak loads
13. Useable on 6.0V
| Technical information |
| Weight: |
16.5grams / 0.59oz |
| Dimensions: |
26 x 13 x 26 mm / 1.16 x 0.51 x 1.02 inch |
| Torque At 4.8V: |
4.2kg/cm , 57 oz/in |
| Torque At 6.0V: |
4.7kg/cm , 62 oz/in |
| Speed At 4.8V: |
0.15sec / 60 deg at no load |
| Speed At 6.0V: |
0.13sec / 60 deg at no load |
|
