|
Description:
1 YEAR WARRANTY
Warranty terms and conditions
All HIFEI brushless ESC are committed to one year free warranty on defective components and workmanship while ESC is not dissembled, modified or repaired by anybody. The ESC within warranty will be repaired at no charge. Only the shipping costs back to factory will be charged.
For those which are beyond warranty conditions, we would repair with corresponding charge. The cost will depend on the damage degree.
1)Microprocessor controlled
2)Extremely low resistance
3)5A continous(7A surge)
4)Up to 7cells NiMH/NiCad or 2 cell Lithium-polymer
5)High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
6)BEC:0.8A
7)Support 2 micro servos
8)Programmable low voltage cutoff
9)Programmable cutoff types(soft cutoff/hard cutoff)
10)Programmable brake type(disable/soft brake/hard brake)
11)Time advance programmable (low/standard/high)
12)Programmable current limiting(very ensitive/standard/insensitive/disable)
13)Programmable startup type(very soft start/soft start/fast start)
14)Thermal Protection(100 centigrade)
15)Apply to most of inrunner and outrunner brushless motors.
16)No complex programming, auto adapt work mode.
17)Runs motor in forward or reverse by swapping any two motor wire connections.
18)Safe “power on” arming program ensures motor will not accidentally turn on.
19)Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
20)The ESC is disabled when the voltage is over 8.5V at power-on.
| Technical information |
| Size: |
16mm X 15mm X 5mm |
| Weight: |
2g with wires |
|
